Electromagnetic Interference Filter for Inverter

Basic Info

Model No.: FT330/FT330T

Operating Frequency: 50/60Hz

Climatic Category(IEC 60068-1): 25/085/21(-25℃ /+85℃ Damp Heat Test For 21 Days)

Rated Voltage: 110/250VAC

Rated Current: 1-10A@40℃

Test Voltage: 1500VDC, 3S(line-line); 1500VAC, 3S(line-ground)

Additional Info

Packaging: Carton

Productivity: 500,000pcs annually

Brand: FILTEMC

Transportation: Ocean,Air

Place of Origin: Jinan

Certificate: ISO9001, CE, UL, TUV, RoHS

HS Code: 8548900001

Port: Qingdao,Tianjin,Beijing

Product Description

The FT330/FT330T electromagnetic interference (EMI) filter, inverter filter reduces conducted noise on the power supply wiring generated by an inverter. 

It is installed only on the input side of an inverter on the wiring from a power supply to an inverter. 

The EMI filter works by presenting a higher resistance to higher frequency content, which in turn, restricts the flow of high frequency signals.

Introduction of EMI RFI Power Filter:

Rated current: 6-2000A

Stud or terminal block optional ( > 250A it is copper bar)

FT330 series are general purpose filters, suitable formost inverter brand

Could be customized according to the real interference

situation of customer's working field

Features and Beneifits of RFI Power Filters:

FT330 series is designed according to the frequency characteristics of interference generated by inverter when it works towards power grid or other digital equipment.

Three-stage filtering design, high impedance at broad frequency range due to special magnetic materials adopted.

Assure the smooth operation of other electronic devices in the vicinity, solve the interference problems of inverter.

Touch-safe terminal block versions available to meet the high safety requirement of certain special applications.

Copper bar terminals applied for versions above 250A to keep pace with international standard, easy and safe connection.

520VAC or 690VAC high voltage versions optional.

Typical Applications of EMI Power Filters:

Inverters and converters, servo driver

Variable frequency power supply and other industrial

electronic equipment comprising frequency inverters

Technical Data of RFI Noise Filters:

1. Storage of EMI Filters: 

•  The DC Power Line Filters mustn't be left out in the heat of the sun or exposed to the rain, it should be stored in warehouse with good ventilation, surrounding temperature between -30℃ and +65℃ , the highest relative air humidity lower than 90%, and no corrosive liquid or gas.

2. Installation of EMI Power Filters:  

• RFI Noise Filters should be installed at power input, and the line inside the chassis be as short as possible to reduce radiated interference. 
• Both input and output lines of Inverter filters neither be intersected nor be tied up by string.
• Make sure the mounting flange fully grounded, and keep the ground cable as short as possible if filters are connected to other equipment. 
• If the terminal is stud, please use two spanners to fasten the screw nut when connecting to avoid stud rotating and thus causing changes to the internal circuit and consequently leading to filters arcing, short circuit, broken down or the filtering effect worsened. 
• First use spanner1 to fix the screw nut near the metal case, then use spanner2 to tighten the screw nut in front( shown as Figure1), otherwise the terminals may be damaged. 
• Apply the same for the connection of other phases.

Requests for samples of any catalog item are available for engineering evaluation Free of Charge.

All EMI Filters are RoHS compliant and approvals held include CE, UL,cUL and TUV.

All quality control procedures are fully documented and available for review. FILTEMC is ISO 9001 compliant.